Futaba 40 MHz And 24 Gig Radios:Model-Boats

Layout Table~~~~1730~1730~~

Futaba Radios Systems~~~~1730~2104~~

Bread~

~~~1730~2900~~

New Display Item~~~~1730~2105~~

New Display Item~A large selection of Radio systems for model boats made by Futaba
from 2 channel too 6 channel sets including servos and accessiories~~~1730~2103~~

New Layout Table~~~~1730~2106~~

2 ER 40Mhz~This two-stick, digital proportional 40 AM system is ideal for entry-level cars, boats .
Stylish new case that is the result of Bioengineering Design, with the look and feel that young modellers demand
Fine trims that are easily accessible on the front panel for convenience
Short sticks that allow for full range of movement by smaller hands
Servo Reversing and Surface Mount Technology
Includes two S3003 servos and a R122JE receiver Switch and battery box
~This two-stick, digital proportional 40 AM system is ideal for entry-level boats .
Stylish new case that is the result of Bioengineering Design, with the look and feel that young modellers demand

Digital proportional 2 channel system.
New 'easy grip' streamlined profile.
Short stick length for precise control.
Servo reversers on both channels.
Externally mounted charge socket for easy access
Supplied with R122JE receiver and two high torque S3003 servos
Aluminium stick clips included (2 pieces)~2 ER 40Mhz|Futaba/2ER/40mhz|~1730~2107~futaba 2 channel ,radio~

SKYSPORT 4YF 40Mhz~The 4YF next step on from the 2 channel
when you need more than just left and right forwad and backwards then the 4YF Skysport is for you .
Even with its surprisingly low price, this radio is packed with features, in a sleek, slim case. And when you compare its convenience and performance to the competition, you'll discover that the 4YF is the best value in a quality system.
A dual-conversion, R127DF narrow-band FM receiver filters out more interference, for more precision and control.
All-channel servo reversing provides more installation options.
The power and servo reversing switches are located down and out of the way for convenience, and to avoid accidental changes.
with 3x 3003 servos
Full TX and Rx NiCad's—made from genuine Sanyo® cells—can be recharged simultaneously with the included 50A overnight AC charger.
The battery meter features green and red LED for instant "go/no-go" status.~The next step on from the 2 channel when you need more than just left and right forwad and backwards then the 4YF Skysport is for you .
Even with its surprisingly low price, this radio is packed with features, in a sleek, slim case. And when you compare its convenience and performance to the competition, you'll discover that the 4YF is the best value in a quality system.
A dual-conversion, R127DF narrow-band FM receiver filters out more interference, for more precision and control.

All-channel servo reversing provides more installation options.
The power and servo reversing switches are located down and out of the way for convenience, and to avoid accidental changes

Fitted with a sprung trainer switch for ease of operation, Futaba's trainer function allows you to link two transmitters with a dedicated trainer lead so that the instructor can pass control of the model to the student in flight. If the student gets into difficulty, the instructor simply releases the switch to regain full control of the model.

System Features:
Built in trainer facility with sprung switch
Four channel servo reverse
Supplied complete with 3 x S3003 servos
Rechargeable batteries and charger included
~SKYSPORT 4YF 40Mhz|futaba/skysport4yf/40Mhz|~1730~2108~6 channel radio~

Futaba 6EXA 40Mhz~Simplicity:
The new Futaba 6EXA combines simplicity and sophistication in a computer radio ideal for your needs now and into the future.
The 6EXA's powerful software is designed to make initial setup and trimming of your Model Boat simple and more accurate than a conventional radio and with its liquid crystal display the 6EXA is easy to understand, yet powerful enough to offer you cutting edge features!
Sophistication
:With independent memories for SIX different models, you can switch planes without re-trimming.
Programming features including servo reversing and end point adjustment on all channels, plus dual rates, exponentials and programmable mixing.
The 6EXA also includes four factory set, pre-programmed 'wing type' mixers
All features can be selected and adjusted simply using the mode / select keys and data input jog switch, with everything shown clearly on the liquid crystal display, so you always know exactly what's going on! Check out the screen on the left.
~With the 6EXA, is a fully fuctional 6 channel system with an onboard computer.offering a whole set of extra functions for the model boat enthusiast
Computer speed and accuracy top the list, followed closely by 6-model memory, 241-position digital trims, preset wing mixes, a user-programmable mix, dual rates, exponential, ball bearing servos and Futaba's most user-friendly programming yet.
Simple "go-with-the-flow" routines use a big, bright 40-segment LCD to show the shortest and most direct route to each feature. Combine that with two buttons and a data input lever, and the 6EXA becomes a way to accomplish the formerly impossiblel a way to lock precise set-ups in multi-model memory with digital accuracy and utter simplicity.
6-model memory with reset
241-position digital trims on throttle, rudder, elevator and aileron
Dual rates and exponential on aileron and elevator
All-channel servo reversing
All-channel EPA (End Point Adjustments)
Fully proportional flap knob with included, optional lever
4 factory-programmed wing mixes flaperon, V-tail, flaperon/V-tail and elevon (delta mixing)
1 user-programmable mix
4 X 3003 Servos
Trainer system*/Throttle cut switch
User-selectable stick modes
Sanyo 600mAh Tx and Rx NiCad's w/dual-output charger
Audible low-battery warning
R136F 6-channel FM receiver
Adjustable control stick length
Retract switch
40-segment LCD
~Futaba 6EXA 40Mhz|Futaba/ 6EXA /40Mhz|~1730~2109~computer set 6 channel,6exa~

Futaba 6EXP 2.4 Gig~New From Futaba the 6EX 2.4GHz FASST™ Radio System

Futaba Advanced Spread Spectrum Technology

It's everything modelers want in a full-range 2.4GHz system! Futaba has been using Spread Spectrum technology for nearly 15 years in industrial R/C applications, so they have the dedicated engineering staff with 2.4GHz expertise. Unlike other manufacturers who started offering 2.4GHz for hobby R/C models using off-the-shelf IC chips, Futaba invested in extra research and development - resulting in a system that uses a custom IC chip that's ideally suited for the unique demands of R/C modeling. When you discover all the advantages of Futaba's 2.4GHz FASST system, you'll see that it was worth the wait!

The 2.4GHz FASST system: offering the highest levels of performance, convenience and "peace of mind" for Model Boating airplane AND heli flyers!

Convenient, Worry-Free Operation - Now you can enjoy the convenience of 2.4GHz operation with the quality and reliability of Futaba! No more worry about someone accidentally turning on another system on your frequency. You can sail anywhere without concern for conflict with another nearby radio system. And at the Lake side there's no more waiting for your frequency clip to become available… just turn it on and Sail!

Available Now

~New From Futaba the 6EX 2.4GHz FASST™ Radio System

Futaba Advanced Spread Spectrum Technology

The 2.4GHz FASST system: offering the highest levels of performance, convenience and "peace of mind" for Model Boating airplane AND heli flyers!

Compact, "all-in-one" R606FS receiver - The small, but powerful one-piece R606FS can easily control Large scale models, but is small enough (just 7 grams without case!) small fast electric .

Higher sensitivity - which enables you to stay in complete control of your model, even at greater distances. It also offers greater signal selectivity, which prevents unwanted interference.

Constant Channel Shifting - unlike other 2.4GHz systems that stay on one or two frequencies (leaving the potential for interference), the 2.4GHz FASST shifts every two milliseconds, so signal conflicts and interruptions are virtually impossible.

Pre-Vision™ Packet Screening Technology - scans the incoming data to look ahead for potential problems and apply sophisticated error correction techniques. The result is a system that gives the user a solid, impenetrable link with his model.

Dual Antenna Diversity (DAD) - which means the system seamlessly selects the best reception between two receiver antennas, so there's no loss of signal, regardless of the angle of the model .

The Easy Link™ system - The 6EX transmitter has a unique ID code that, after linking with the R606FS receiver, assures this receiver will only follow commands from this transmitter. Set it and forget it! Just push the recessed button on the receiver and it will never forget the unique transmitter ID code, which locks this receiver to the transmitter. And with over 134 million possible codes, there's no chance for a conflict.

A "no-hassle" Fail Safe system - The 6EX 2.4GHz's Fail Safe is programmed right through the transmitter, just like on conventional systems. Other radios require a complicated six-step process to set up their Fail Safe, along with a separate binding plug that can easily be misplaced.

Custom 2.4GHz IC chips - Futaba's own custom IC chips are backed by 15 years of 2.4GHz experience in industrial R/C uses, and are "purpose built" for R/C systems. Some manufacturers rely on off-the-shelf IC chips, without the custom application development that only Futaba's vast experience can provide.

The 6EX: computer programming functions and features that are state-of-the-art!Standard Programming Functions:

* Model Select - six model memory.
* Model Type - select airplane or heli programming in one transmitter.
* Servo Reversing - on all six channels.
* Dual Rate/Exponential - for ailerons, elevator and rudder.
* End Point Adjustment - fine-tunes servo throws on all six channels.
* Digital Trim - stores trim settings for each model for aileron, elevator, rudder and throttle.
* Fail Safe - a safety throttle setting in case of loss of transmitter signal.
* Battery Fail Safe - moves the throttle to a preset position when the airborne pack reaches 3.8V.
* Stick Mode - choose from Mode 1 through 4.
* Range Checking - Power Down reduces transmitter output power for up to one minute, allowing range checking from 50 paces away.
* Changeable Throttle Stick - select ratchet for airplanes or smooth for helis.
* Adjustable Stick Length - choose the length that suits your flying style.

Programming Functions:

* Wing Mixing - for flaperon, flap trim, V-tail and elevon.
* Trainer System - with the transmitter as either the master or student system. Compatible with other Futaba systems.
* Throttle Cut - pre-programmed for safely shutting off the engine.
* Programmable Mixing (1 & 2) - two different mixes allow any two channels to be combined.
* 5-Point Normal and Idle Up Throttle/Pitch Curves
* Throttle Hold - for autorotation.
* Revo (Revolution Mixing) - mixes rudder and pitch together.
* Gyro Mixing - two gyro gain settings can be programmed and selected during flight.
* Swash to Throttle Mixing - corrects slowing of the engine's speed caused by the swash plate.
* Swash plate Types - choose from 1S (independent aileron, pitch and elevator servos linked to the swash plate), 3S (120° CCPM), or 3E (90° CCPM).
* Swash AFR - Adjustable Function Rate, for use with 3S or 3E swash types.

What makes Futaba's 2.4GHz system different:

* Channel Shifting means that interference is virtually impossible. Futaba's system only occupies an individual frequency for 2 milliseconds!
* Stronger, More Robust Link - Futaba's system doesn't need redundant receivers. Instead, it uses a combination of Channel Shifting and Dual Antenna Diversity (DAD) to provide a robust, highly dependable link between transmitter and receiver.
* Pre-Vision™ Packet Screening Technology - looks ahead for potential problems when scanning incoming data and applies sophisticated error correction techniques - resulting in a system that gives the user a solid, impenetrable connection with his model.
* Custom-Developed Technology - Futaba uses custom IC chips that have been designed specifically for radio control. With over 30 years of R/C system experience, Futaba knows it's important to make the investment in research and development to assure quality, reliability and safety. The FASST system is a result of extensive development and testing and it's the only system good enough to carry the Futaba name.

Available Now

~Futaba 6EXP 2.4 Gig|Futaba /6Exp 2.4Ghz|~1730~5517~Futaba 6 exp ,2.4 Ghz ,Model Boat Radio ,~

New Display Item~

Accessories

~~~1730~2112~~

New Layout Table~~~~1730~2124~~

New Display Item~~~~1730~2126~~

Futaba 40Mhz Crystals~~~~1730~2125~~

Pairs Crystals~

Futaba 40Mhz crystals in pairs

Rx Crystals~

Futaba 40Mhz Receiver crystals

TX Crystals~

Futaba 40Mhz Transmiter crystals

New Display Item~~~~1730~2128~~

New Layout Table~~~~1730~2113~~

Futaba Receiver's~~~~1730~2132~~

Futaba 2 channel Receiver~low cost 27mHz AM Or 40Mhz Am two channel receiver that's designed for use with the Attack ER, DR, SR & Attack II systems. Incorporates single chip design for improved reliability and a new moulded case with crystal protection. Ideal for use in model cars, boats and simple aircraft.

Channels: 2Ch
Current Drain: 32mA
Dimensions: 46 x 31.5 x 25mm
Weight: 16.8g

Please Use dropdown Menu to Select 27 or 40 Am Version

~~Futaba 2 channel Receiver 27 Am|Futaba/ 2 channel Receiver/ 27 Am|Futaba 2 channel Receiver 40 Am|Futaba/ 2 channel Receiver /40 Am|~1730~2114~2 channel receiver futaba~

Futaba Micro R114F Receiver 40Mhz~This Micro R114F receiver adds a new category to the Futaba range. where space and weight or a factor , this high quality receiver weighs only 10.9g with case and crystal. Though they do have slightly reduced range about 2/3rds that of a slandered receiver

Channels: 4Ch
Current Drain: 11mA
Dimensions: 21.8 x 31.7 x13.5mm
Weight: 10.9g (w/Case &Xtal)7.5g (w/o Case & Xtal)~~Futaba Micro R114F Receiver 40Mhz|Futaba/ Micro R114F Receiver /40Mhz|~1730~2119~futaba receiver,micro~

Futaba R137F Receiver 40Mhz~Replacing the popular and reliable R136F receiver was always going to be difficult, but Futaba have now produced the definitive standard receiver, the new R137F 7 channel receiver.

The same size as the old 6 channel receiver, yet offering an extra channel at a lower price, and with the legendary Futaba reliability, this will be the receiver all others are compared against.

Available on both 35 and 40 MHz. l
Channels: 6Ch
Current Drain: 11mA
Dimensions: 50.3 x 33.4 x 18.1mm
Weight: 28g~~Futaba R137F Receiver 40Mhz|Futaba/ R137F Receiver thin/ 40Mhz|~1730~2120~futaba receiver,136~

Futaba R147F Receiver 40Mhz~A thin, light weight (26g) single conversion FM Receiver for application where space is at a premium, such as gliders. 7 channels give all the functionality required and insertion of the servo plugs in the end of the case eases installation.

Channels: 7Ch
Current Drain: 11mA
Dimensions: 64 x 24.2 x 17.6mm
Weight: 26g~~Futaba R147F Receiver 40Mhz|Futaba/ R147F Receiver /40Mhz|~1730~2122~futaba receiver,147 f~

Futaba R118F Receiver 40Mhz~The standard, single conversion receiver for aircraft and boat applications. Popular because of its included DSC facility. With particularly high resistance to vibration, it’s also compatible with older, non-dual conversion receiver crystals.

Channels: 8Ch
Current Drain: 10mA
Dimensions: 60 x 36.5 x 20.5mm
Weight: 35g

~~Futaba R118F Receiver 40Mhz|Futaba/ R118F Receiver/ 40Mhz|~1730~2121~futaba receiver,118,~

Futaba R138DF 40Mhz DC~The standard, Dual Conversion receiver that’s supplied in many of Futaba’s sport radio systems. Incorporates dual gate Mosfet technology for excellent overload characteristics. Good for use in IC Boats.

Channels: 8Ch
Current Drain: 11mA
Dimensions: 63.5 x 35 x 21mm
Weight: 33g~~Futaba R138DF 40Mhz DC|Futaba /R138DF/ 40Mhz/ DC|~1730~2116~futaba receiver, 138,dual con,~

Futaba R606FS 2.4 Gig Receiver 6 Channel~The heart of the FASST system is the R606FS receiver: there's no other 2.4GHz receiver like it!

Size and weight
The R606FS measures 1.64 x 1.08 x 0.36 inches and weighs just 7 grams without the case...perfect for park flyers, but powerful enough to easily control giant-scale models too. It’s the best of both worlds!
Full-range capability
The competition’s full-range system includes a bigger, two-piece receiver; a smaller park flyer receiver must be purchased separately. The compact R606FS unit offers “all-in-one” convenience!
Antenna stress relief
Unlike other receivers, the R606FS uses rubber grommets to minimize stress on the antennas. This helps prevent the antenna wire from fraying, and possibly putting your model at risk.Installation ease —The single R606FS unit can be installed without making any modifications. The competitor’s 2.4GHz system requires that their two receivers be mounted in separate locations.
Number of connections
The competition’s two receivers mean two additional connection points, doubling the potential for a problem.~~Futaba R606FS 2.4 Gig Receiver 6 Channel|2913|~1730~5659~~

Layout Table~~~~1730~2131~~

Futaba Servos~~~~1730~2133~~

Futaba 3003 Servo~New standard size economy servo for general applications. Ideal for use with cars,
power boats, yachts, electric and engine powered aircraft and helicopters.

Torque: 3.2 Kg/cm
Speed: 0.23 sec/60°
Dimensions: 40.4 x 19.8 x 36mm
Weight: 37.2g~~Futaba 3003 Servo|Futaba /3003 Servo|~1730~2118~servo futaba,servos~

Futaba 148 Servo~One of the most popular general purpose servos. Its reputation
is second to none. Ideal for use with cars, power boats, yachts, electric and engine powered aircraft and helicopters.

Metal Bearing
Torque: 3.0 Kg/cm
Speed: 0.22 sec/60°
Dimensions: 40.4 x 19.8 x 36mm
Weight: 44.4g~~Futaba 148 Servo|Futaba /148 Servo|~1730~2134~servo futaba servos~

Futaba 3001 Servo~Economical servo for all applications. This ballraced servo has
an exceptionally long service life. Ideal for use with cars, power boats, yachts, aircraft and helicopters.

Ballraced
Metal Bearing
Torque: 3.0 Kg/cm
Speed: 0.22 sec/60°
Dimensions: 40.4 x 19.8 x 36mm
Weight: 45.1g~~Futaba 3001 Servo|Futaba /3001 Servo|~1730~2135~Servo futaba servos~

Futaba 3010 servo~Medium duty, standard sized servo with that bit of extra power and speed.
Ideal for sport applications.
Single ball bearing.

Specifications
Torque 6.5 Kg/cm
Speed 0.16 sec/60°
Dimensions 40.0 x 20.0 x 38.1mm
Weight 41g
~~Futaba 3010 servo|Futaba /3010 servo|~1730~3736~~

Futaba 5801 SailWinch~A true sail winch, the S5801 has the massive torque and wide rotation angle needed for model yachts.
The number of rotations of the drum output can be adjusted (2-6 turns) via an integral V/R pot.

Ballraced
Brass Gears
Torque: 9.8 Kg/cm (7.2v)
Speed: 0.5 sec/60°
Dimensions: 46 x 25 x 44mm
Weight: 83g~~Futaba 5801 SailWinch|Futaba/ 5801/ SailWinch|~1730~2136~futaba sailwinch servo servos~

Leads~~~~1730~6436~~

Futaba type 200mm Extension Lead~Futaba type 200mm Extension Lead gold plated contacts~~Futaba type 200mm Extension Lead|Futaba type 200mm Extension Lead|~1730~6438~Futaba type 200mm Extension Lead~

Futaba type 400mm Extension Lead~Futaba type 400mm Extension Lead gold plated contacts~~Futaba type 400mm Extension Lead|Futaba type 400mm Extension Lead|~1730~6440~Futaba type 400mm Extension Lead~

Futaba type 1000mm Extension Lead~Futaba type 1000mm Extension Lead gold plated contacts~~Futaba type 1000mm Extension Lead|Futaba type 100mm Extension Lead|~1730~6442~Futaba type 1000mm Extension Lead~

Futaba type Ylead~Futaba Type Ylead~~Futaba type Ylead|Futaba type Ylead|~1730~6446~Futaba type Ylead~

Futaba Bec Type Switch~Futaba Bec Type Switch~~Futaba Bec Type Switch|Futaba Bec Type Switch|~1730~6450~Futaba Bec Type Switch~

Futaba Type Switch with Carge Lead~Futaba Type Switch with Carge Lead~~Futaba Type Switch with Carge Lead|Futaba Type Switch with Carge Lead|~1730~6444~Futaba Type Switch with Carge Lead~

Futaba type Servo lead~Futaba type Servo lead~~Futaba type Servo lead|Futaba type Servo lead|~1730~6452~Futaba type Servo lead~

Futaba type Servo socket lead~Futaba type Servo socket lead~~Futaba type Servo socket lead|Futaba type Servo socket lead|~1730~6454~Futaba type Servo socket lead~

Menu Page | Toolbar Page |