Robbe F-Series Radios:Model-Boats

Layout Table~~~~1733~1733~~

Robbe Fx Series Radio's~~~~1733~2351~~

Bread~

~~~1733~2904~~

New Display Item~~~~1733~2906~~

New Layout Table~~~~1733~2352~~

Robbe FX 18~The FX-18 is a successful, high-performance computer radio control system suitable for all types of modeler From the beginer to the expert alike .The Radio is a high end PCM /PPM computor system .
The case is ergomomicly designed to give an easy to grip also it can be used in a tray .All controlle funtions are easily reachable with the fingers so as not to need to letgo the set .

The set comes with Tx nicad , 3 servos, Rx switch , Battery box , two linnier channels one for the front and one for the rear slider port also included are two mixer switch that can b added to the set

Part of the atraction of this set is the expandablility , and it has now become even more attractive.The FX-18 transmitter now features Version 2 of the software, which expands the range of functions available. The software version is displayed on the integral screen when the transmitter is switched on.

~The FX-18 is a successful, high-performance computer radio control system suitable for all types of model, and it has now become even more attractive.The FX-18 transmitter now features Version 2 of the software, which expands the range of functions available. The software version is displayed on the integral screen when the transmitter is switched on.

Dimensions: 205 x 170 x 52 mm
Weight: 650 g
Frequency band: 40.00
Channel spacing: 10 kHz
Spotfrequencies: 22.00
Current drain: 407250 mA
Special Funktiones: 16 Funktionen / 8 Servos
Power Supply: 9.6 V Akku
Transmission system: FM/PCM
Functions: 12/6 Servos

Kit contents:
1 FX-18 V2 transmitter with 8 NiMH 1400 mAh rechargeable battery
1 R 137 F 7-channel receiver
3 S 3001 servos, with accessory packs
1 Switch harness with charge socket
1 Receiver battery box
1 Pair of crystals
1 Linear slider, F 1587 (front)
1 Linear slider, F 1586 (rear, long)
1 Mixer switch, 2-position, short, F 1502
1 Mixer switch, 2-position, long, F 1521
~Robbe FX 18|2745|~1733~4933~~

FX Modules & Accessories~~~~1733~4937~~

Multi Switch Modul Sound FX 1-8382~Expansion module for controlling auxiliary functions.
Expands two proportional channels of the FX transmitter to provide up to 23 switched channels.
The carefully selected switches are arranged in such a way that they provide optimum control of a Truck Sound module or Navy Sound module. To control all the channels one additional switch has to be installed in the transmitter.
This Multi-Module can also control a second Multi decoder, although additional physical controls have to be fitted in the transmitter’s option wells in this case.
Any type of decoder can be used, and the transmitter controls can be set up in any arrangement you like.~~Multi Switch Modul Sound FX 1-8382|Robbe-Multi Switch Modul Sound FX 1-8382|~1733~4941~~

Multi Prop Modul FX 1-8380~Expansion module for controlling auxiliary working systems.
Expands two proportional channels of the FX transmitter to provide up to 32 switched channels. The carefully chosen switches are arranged in such a way that they provide optimum control of one Multi-Switch-Prop decoder. To control the proportional channels two further sliders have to be installed in the transmitter.
This Multi-Module can also control a second Multi decoder, although additional physical controls have to be fitted in the transmitter’s option wells in this case.
Any type of decoder can be used, and the transmitter controls can be set up in any arrangement you like.~~Multi Prop Modul FX 1-8380|Robbe-Multi Prop Modul FX 1-8380|~1733~4943~~

New Product Item~~~~1733~4945~~

Robbe F14 Series Radios~~~~1733~4939~~

Robbe F14 Radio~The expandable RC-System

The F-14 is a universal radio system in tray-type design of the successful and proven F-series and
features 5 option wells for expansion to suit individual needs. The transmitter can be expanded to 16 functions (8 channels) by adding optional switched and proportional channels, and a range of
optional modules can be fitted such as Multi-Switch, Multi-Prop, Dual-Rates and Mini Options to meet
the requirements of the more demanding user.

The new features of the F-14

* Basic transmitter can be expanded to 16 functions with 2 proportional sliders and 2 switched channels.
* Multi-Switch, Multi-Prop or Multi-Switch-Prop channel expansion to 5 prop + 48 multi-channels = 106 Functions
* No Multi-Adapter necessary
* Prepared for front installation of the Trainer Module 4 for teacher-pupil operation with almost all robbe-Futaba transmitters
* 5 option well now also suitable for Multi- Module with 8 control elements.
* Optional helical aerial

Please not that the Radio Comes as a 4 channel set and not with all the switches shown in the picture~The expandable RC-System

The F-14 is a universal radio system in tray-type design of the successful and proven F-series and
features 5 option wells for expansion to suit individual needs. The transmitter can be expanded to 16
functions (8 channels) by adding optional switched and proportional channels, and a range of
optional modules can be fitted such as Multi-Switch, Multi-Prop, Dual-Rates and Mini Options to
meet the requirements of the more demanding user.

The new features of the F-14

Further features:
* Servo reverse and programmable sequence of control functions.
* Large battery compartment for batteries up to 2000 mAh = over 10 hours operational time.
* Single-point attachment lug for neckstrap; transmitter can also be used in a tray.

Specification:
Dimensions: 230 x 200 x 50 mm
Weight: 600 g
Frequency band: 40.00
Channel spacing: 10 kHz
Spotfrequencies: 22.00
Transmission system: FM
more Specifications:
Functions: 8 / 4 Servos
Function expansion: 8 / 4 Servos
Power supply: 9.6 V aNC-Battery
Power consumption: 40 / 200 mA
w./o. RF circuit
Special functions: Channel expansions via Multi-Module, Mini Option, Dual Rate
Kit contents:
* 1 Transmitter F-14 Navy
* 1 Receiver R-118 F
* 1 Servo S 148
* 1 Servo accessory bag
* 1 Switch harness with charge socket
* 1 Transmitter battery box
* 1 Receiver battery box
* 1 Pair of crystals
~Robbe F14 Radio|Robbe F14 Radio/F4039|~1733~2353~Robbe,F14,Robbe F14, F16,Decoder,module, german,westbourne-models.com,F14 Navy,twin stick,radio 40mhz,radio,~

Robbe F14 Navy~F-14 Navy

The same system as the F-14, but with the refined Navy Twin-Stick unit in place of one standard stick unit. The parallel dual control system includes fine trims on each channel, making the transmitter ideal for the model boat enthusiast.

The expandable RC-System

The new features of the F-14

~F-14 Navy

The expandable RC-System

The new features of the F-14

Specification:
Dimensions: 230 x 200 x 50 mm
Weight: 600 g
Frequency band: 40.00
Channel spacing: 10 kHz
Spotfrequencies: 22.00
Transmission system: FM
more Specifications:
Functions: 8 / 4 Servos
Function expansion: 8 / 4 Servos
Power supply: 9.6 V aNC-Battery
Power consumption: 40 / 200 mA
w./o. RF circuit
Special functions: Channel expansions via Multi-Module, Mini Option, Dual Rate
Kit contents:
* 1 Transmitter F-14 Navy
* 1 Receiver R-118 F
* 1 Servo S 148
* 1 Servo accessory bag
* 1 Switch harness with charge socket
* 1 Transmitter battery box
* 1 Receiver battery box
* 1 Pair of crystals
~Robbe F14 Navy|Robbe/F14 Navy/F4009|~1733~2354~Robbe,F14,Robbe F14, f14 navy ,twin stick,radio 40mhz,radio,~

F14 - Modules accessories~~~~1733~2363~~

Navy Twin Stick Unit 1564~A special parallel twin-stick unit with fine-action trim for each function. Designed for controlling twin-engined model boats, but can also be used to provide separate control of jib and mainsail on a model sailing boat. With latching function for parallel operation. Designed as an upgrade for F-14 and FC-16 transmitters.~~Navy Twin Stick Unit 1564|Robbe/Navy Twin Stick Unit/1564|~1733~2420~Robbe navy twin stick module f14 f16~

Multi Prop Module 4+4 8039~The 4+4 Switch Module expands your F14/16 by 4 proportional channels and 4 switched funtions .
Alowing you to controll with proportional dials say a Crane or monitors for intence .
And turn lights on and off with the switched funtions

Now to go with this Unit you will need the decoder Pt No 8042 Listed Just Below ~~Multi Prop Module 4+4|Robbe/Multi Prop Module 4+4/8039|~1733~2370~robbe 4+4 Multi prop module f14 f16~

Multi Prop 8 Decoder 8042~For each Multi-Prop module in the transmitter one decoder is required at the receiver end. Same decoder as No. F 1516, but without connecting leads.
This unit allows you to get 4 extra proportional channels and 4 momentary proportional channels
~~Multi Prop 8 Decoder 8042|Robbe/Multi Prop 8 Decoder/8042|~1733~2371~Multi prop Decoder 4+4 robbe f14 f16~

Multi-Prop 8 Module 1512~This module is designed for controlling auxiliary functions, and expands one proportional channel on the
transmitter to provide 8 proportional functions. It provides accurate, simultaneous control of 8 channels.~~Multi-Prop 8 Module|Robbe/Multi-Prop 8 Module/1512|~1733~2409~multi prop 8 module f14 f16 robbe~

Multi-Prop 8 Decoder 1516~For each Multi-Switch module in the transmitter you need one decoder at the receiver.
The decoder takes up only one servo channel, and can switch 8 channels directly. Operating voltage 4.8 - 12 V, max. 1.2 A per output.
Set includes 8 connecting leads, F 1439.~~Multi-Prop 8 Decoder|Robbe/Multi-Prop 8 Decoder/1516|~1733~2407~multi prop 8 decoder f14 16 robbe~

Navy Sound Module 8270~A sound module for model boats, containing six digitally stored original sounds. At any time a signal can be
superimposed on the engine noise simultaneously, such as the Martins horn, foghorn, ship's bell,
typhoon or destroyer siren, without interrupting the sound of the diesel engine.
The diesel engine sound varies according to the speed of the drive motor, and features start-up and run-
down sound phases. The sound module features an integral 8-channel multi-switch decoder which is used to switch the individual sounds on and off.
A further two multi-switch switched channels are available for any purposes you wish, and can be used for
direct control of auxiliary functions drawing up to 1 A (lights, anchor winch etc.). All inputs and outputs are protected against short-circuit and reverse polarity.
The sound module can be used with the earlier 6-channel and the current 8-channel robbe Multi-Switch
modules, and also with other makes of similar unit. A powerful, high-volume amplifier stage provides distortion-free reproduction, and the volume is infinitely variable.
A Multi-Switch module must be installed in any robbe Futaba system transmitter to control the sound effects.

Specification::
Weight: 65 g Voltage: 6 - 12 Volts
current: 20 - 30 mA Dimensions: 77 x 48 x 24 mm
Motor connection: -14 ... +14 Volts
Switched power: 1 Amp
Power output: approx. 6 W into 8 Ohms at 12 V
Loudspeaker: 4 - 8 Ohm
~~Navy Sound Module 8270|Robbe/Navy Sound Module/8270|~1733~2417~Navy sound module robbe f14 f16~

Multi Switch Prop 12+2 Module 8101~Probably the most versatile of the modules The 12+2 Module Block is used for controlling auxiliary functions; expands one proportional
channel on the transmitter to provide 12 switched functions and 2 proportional servo channels.
This is a combination module which covers most requirements.
~~Multi Switch Prop Module 8101|Robbe/Multi Switch Prop Module/8101|~1733~2372~Multi Prop 12+2 Module f14 f16~

Multi Switch Prob Module 12+2 Decoder 8370~For each Multi-Switch module in the transmitter you need one decoder at the receiver end. This takes up
only one servo channel, and can switch 12 channels directly as well as providing 2 servo channels. Operating voltage 4.8 - 24 Volts, up to 2.7 A per output.
Now with Memory Function: both channels assigned to a single switch can be turned on simultaneously.
The memory function can be switched off at any time.
The Multi-Switch-Prop decoder can also process the switched functions of the 8-channel and 16-channel modules.
The output stage of this decoder features protection against short-circuit, reverse polarity and overheating,
making it virtually indestructible. Set supplied without connecting leads.
~~Multi Switch Prob Module 12+2 Decoder 8370|Robbe/Multi Switch Prob Module 12+2 Decoder/8370|~1733~2373~12+2 module decoder f14 f16 robbe~

Multi-Switch 16 Module~This module is designed for controlling auxiliary functions, and expands one proportional channel on the
transmitter to provide 16 switched functions.~~Multi-Switch 16 Module|Robbe/Multi-Switch 16 Module /8084|~1733~2403~multi switch 16~

Multi-Switch 16 Decoder Memory~Can switch 16 channels directly. Operating voltage 4.8 - 24 Volts, up to 1.8 A per output.
Now with Memory Function: both channels assigned to a single switch can be turned on simultaneously. The memory function can be switched off at any time
The output stage of this decoder features protection against short-circuit, reverse polarity and overheating,
making it virtually indestructible. Set supplied without connecting leads.~~Multi-Switch 16 Decoder Memory|Robbe/Multi-Switch 16 Decoder Memory/8369|~1733~2404~multi decoder 16~

Switched Channel 3 Pos. F-14/16 - 1600~Expands the F-14, FC-15 and FC-16 transmitter by one 3-position switched channel.~~Switched Channel 3 Pos. F-14 - 1600|Robbe/Switched Channel 3 Pos. F-14/1600|~1733~2405~3 pos switch f14~

Proportional linear slider Channel F14/16- 1601~ Expands the F-14 or FC-16 transmitter by one slider channel with centre~~Proportional linear slider Channel 1601|Robbe/Proportional linear slider Channel/1601|~1733~2406~F14 liear channel~

Dual Rate Module 1541~For limiting the servo travel of 2 control functions within the range 30-100%. To switch the function off you need a mixer switch, e.g. F 1502.~~Dual Rate Module 1541|Robbe/Dual Rate Module/1541|~1733~2410~dule rate f14~

Mixer Switch 2 pos Short 1502~For F-14 to FC-28 transmitters. Used to switch mixed functions on and off in flight.~~Mixer Switch 2 pos Short 1502|Robbe/Mixer Switch 2 pos Short/1502|~1733~2414~f14 2 pos switch~

Mini Mixer Option 1540 F14 only~Module mixes two control functions, e.g. V-tail, combi-mixer, delta, with variable mix ratio. To switch the function off you need a mixer switch, e.g. F 1502.As Above~~Mini Mixer Option 1540|Robbe/Mini Mixer Option/1540|~1733~2415~mini mixer option f14~

Mini Mixer Option 1539 F16 only~Module mixes two control functions, e.g. V-tail, combi-mixer, delta, with variable mix ratio. To switch the function off you need a mixer switch, e.g. F 1502. As above~~Mini Mixer Option 1539 F16 only|Robbe/Mini Mixer Option /1539 F16 only|~1733~2416~mini mixer option f16~

Relay Reversing Module 8304~Double relay with lead to match Multi-Switch decoder; increases maximum switched current to 16 A.
Relays are pre-wired to provide the functions forward-stop-reverse when you connect a motor and battery.
Ideal for switching high-current auxiliary functions, e.g. pumps, electric motors etc.

Specification::Weight: 30 g
Voltage: 6-12 Volt
From Multi-Switch Decoder)Max Volts. 24 V current: max. 16 A mA Dimensions: 61 x 17 x 18 mm~~Relay Reversing Module|Robbe/Relay Reversing Module/8304|~1733~2418~reversing module robbe~

Relay Module Pt No 8442~Switch relay with connecting lead for Multi-Switch Decoders, increasing the decoder´s switching capacity to 16 A. Suitable for switching high-current auxiliary working systems such as pumps, electric motors etc.

This module cannot be operated directly from a receiver.
Specification:
Weight: 18 g , Voltage: 6..12 Volts , current: 16 mA
Dimensions: 61.5x23.5x18.5 mm~~Relay Module Pt No 8442|Robbe/Relay module/8442|~1733~5485~Robbe ,Relay Module Pt No 8442~

F14 Switch Cover Module 1562~Module cover with label areas, designed to fit the bottom transmitter option well. For modules with 6 physical controls.~~F14 Switch Cover Module 1562|F14/Switch Cover Module/1562|~1733~2419~F14 Face plate~

F14/8 Switch Cover Module 1499~Module cover with label areas, designed to fit the bottom transmitter option well. For modules with 8 physical controls.~~F14/8 Switch Cover Module 1499|2175|~1733~2421~f14 switch cover~

Campac module 16k F16 - 1509~Model data memory module, no battery required. For permanent storage of model data, and for copying or
transferring data between transmitters.

CAMPac 16K module
FC-28 V 3.x´1´models
FC-18 V 3.x´11´models
FC-16´25´models
~~Campac module 16k F16 - 1509|Robbe/Campac module 16k F16 / 1509|~1733~2411~Campac 16k~

Campac module 64k F16- 1566~Model data memory module, no battery required. For permanent storage of model data, and for copying or
transferring data between transmitters.

CAMPac 64K module
FC-28 V 3.x´4´models
FC-18 V 3.x´45´models
FC-16´102´models
~~Campac module 64k F16- 1566|Robbe/Campac module 64k F16/1566|~1733~2412~Campac 64k f16~

Ratchet Spring For F14 1545~For Attack SR, II, CR, DR, ER and F-14. Ratchet spring converts a standard stick into a non self-neutralising function~~Ratchet Spring For F14|Ratchet Spring For F14/1545|~1733~2422~ratchet radio 2 channel~

F series Flexi Aerial 8072~Ultra-short, flexible helical aerials for all F-series transmitters (F-14, FC-16, FC-18 and FC-28).Unobstructed vision and much improved freedom of movement are the practical advantages of this type of aerial. They also eliminate the danger of gradual range loss, as can occur with dirty, corroded or bent telescopic aerials.With a helical aerial the radiated power of the transmitter is unavoidably reduced by about 30% compared with a new telescopic aerial, and for this reason they should only be used for close-range work and under normal reception conditions.Specification:Frequency band:´40 MHzLength:´40/41 MHz: 27 cmAll F-series transmitters have been tested and granted CE approval for use with these helical aerials.~~F series Flexi Aerial|Robbe/F series Flexi Aerial/8072|~1733~2423~robbe aerial flexable helical~

Neck Strap 1550~Soft, variable-length neckstrap, with spring hooks and swivels.Fits Attack, F-14, FC-16, FF3, FF8 and Skysport 4 transmitters.~~Neck Strap F1550|Robbe/Neck Strap/ F1550|~1733~2426~robbe neck strap~

Neck Strap For Fseries Trays F1515~Fits all F-series transmitter support systems and transmitter trays.~~Neck Strap For Fseries Trays F1515|Robbe/Neck Strap For Fseries Trays/ F1515|~1733~2427~Neck strap radio robbe~

F-Series Support Arms F1531~Fits all F-series transmitters (F-14 - FC-28)~~F-Series Support Arms F1531|Robbe/F-Series Support Arms /F1531|~1733~2428~Robbe Transmiter support~

F Series Transmitter Tray F1514~Tray designed for F-14, FC-15, F-16, FC-16 and FC-18 transmitters, with broad handrest surfaces.Supplied complete with soft neckstrap.~~F Series Transmiter Tray F1514|Robbe/F Series Transmiter Tray/ F1514|~1733~2429~robbe tranmiter tray~

F Series Pro Transmitter Tray F1518~High-quality transmitter tray of hollow construction, with compartment for small parts. Complete set with soft neckstrap and rainshield. A special clear plastic cover can be attached to the tray by means of Velcro dots; suitable for the F-14, FC-16 and FC-18.~~F Series Pro Transmitter Tray F1518|Robbe/F Series Pro Transmitter Tray/F1518|~1733~2430~robbe transmiter tray~

Spare Receivers & Servos~~~~1733~2431~~

Robbe-Futaba FP-R118~Universal 8-channel FM receiverWith its 8 channels and FM operation this receiver covers a broad spectrum of applications. SMT construction is the key to its small size. The high-quality circuit technology with FET input stage and dual anti-blocking regulation provide a reliable radio link at all times. Highly integrated receiver IC in conjunction with a ceramic filter designed especially for 10 kHz channel spacing set the new standard. This receiver is particularly reliable even when battery voltage is relatively low.Specification:Channel spacing: 8.00 Weight: 35 gDimensions: 60 x 36.5 x 20.5 mmVoltage: 4.8 - 6 Volts current: 10 mAcurrent: 10 mA~~Robbe-Futaba FP-R118|Robbe-Futaba/ FP-R118|~1733~2432~robbe receiver 118 futaba~

Futaba Servo S3003~Compact, robust general-purpose servo offering the high torque of 32 Ncm. Manufactured using the new wireless assembly technology, giving high vibration resistance and long life. 6-wiper feedback potentiometer and zero-slop pot linkage. High-quality technology at a low price.
Specification:
Dimensions: 40.4 x 19.8 x 36.0 mm
weight: 37.gms
Operating voltage: 4.8 - 6.0 Volts
Nominal voltage: 4.80 Volts
Torque: 32.00 Ncm
Transit speed: 0.18 Sec/45°
~~Futaba Servo S3003|Robbe/Futaba Servo /S3003|~1733~2433~servo futaba servos~

Futaba Servo S148~The standard servo, as supplied in our radio control setsThe S 148 offers proven quality and performance, and millions of them are already in use world-wide. Suitable for all areas of modelling. Manufactured using the new wireless assembly technology, giving high vibration resistance and long life. 6-wiper indirect-drive feedback pot. The latest technology at a very reasonable price.
Specification:
Dimensions: 40.4 x 19.8 x 36.0 mm
weight: 40 g
Operating voltage: 4.8 - 6.0 Volts
Torque: 24.00 Ncm
Transit speed: 0.21 Sec/45°~~Futaba Servo S148|Robbe/Futaba Servo/S148|~1733~2434~servo futaba servos~

Futaba Servo S3001 Ball-Raced~Low-cost ballraced servo for the demanding userUsing the same case size as standard servos, the S 3001 is a good choice where a long-life servo is required. A fine general-purpose servo for small and medium-sized helicopters.
Specification:
Dimensions: 40.4 x 19.8 x 36.0 mm
weight: 45.g
Operating voltage: 4.8 - 6.0 Volts
Nominal voltage: 4.80 Volts
Torque: 24.00 Ncm
Transit speed: 0.21 Sec/45°~~Futaba Servo S3001 Ball-Raced|Futaba Servo S3001 Ball-Raced/F1117|~1733~2435~servo futaba servos~

Robbe Sail Sw1 F8336~A powerful ballraced sailwinch at a reasonable price. Special case design for protection against dust and water, making the winch suitable for use under problematic conditions.The winding travel can be adjusted by fitting winch drums of different diameter (available separately).
Specification:
Dimensions: 59.4 x 29.0 x 52.2 mm
weight: 110.00 g
Operating voltage: 4.8 - 6.0 VoltsNominal voltage: 4.80 Volts Nominal voltage: 6.00 Volts
Torque: 80.00 Ncm~A powerful ballraced sailwinch at a reasonable price. Special case design for protection against dust and water, making the winch suitable for use under problematic conditions.The winding travel can be adjusted by fitting winch drums of different diameter (available separately).
Specification:
Dimensions: 59.4 x 29.0 x 52.2 mm
weight: 110.00 g
Operating voltage: 4.8 - 6.0 VoltsNominal voltage: 4.80 Volts Nominal voltage: 6.00 Volts
Torque: 80.00 Ncm

more Specifications:
Operating voltage:´4.8 - 6 Volts (from receiver battery)
Current drain approx. Idle 9.5 mA
No load 230 mA
Nominal load 1.4 A
Drum Ø:´38 mm (winding Ø)
Winding travel: approx. 12 cm/revolution
Revolutions: approx. 2 - 5 (4 revs. with Futaba systems)
Torque: 100 Ncm
corresponding to:´approx. 11 kg with 17.5 mm drum
approx. 5.3 kg with 38 mm drum
approx. 3.3 kg with 60 mm drum
Suitable for sail areas up to about 0.65 m2 with the 38 mm drum.~Robbe Sail Sw1 F8336|Robbe/Sail Sw1/F8336|~1733~2436~Sail Winch robbe servo servos~

Batteries And Chargers For F Series Radios~~~~1733~2369~~

Transmitter Battery For F14/F16~High-capacity transmitter battery for F-series transmitters
Specification::
Capacity: 1800 mAh
Voltage: 9.6 Volts
~~Transmiter Battery For F14/F16|Transmiter Battery For F14/F16/4126|~1733~2356~Tx battery F14/16 robbe~

Receiver Battery F14/F16 FL~Receiver Battery
4 NiMH 2000AA flat
High-capacity NiMH battery, 4.8 V, 2000 mAh.
Max. discharge current 6 A
Continuous current approx. 4 A
Specification::
Dimensions: 51 x 57 x 14 ,5 mm Weight: 115 g~~Receiver Battery F14/F16|Receiver Battery F14/F16/4551|~1733~2357~f14 /16 Rx battery robbe~

Receiver Battery F14/F16 SQ~Receiver Battery
4 NiMH 2000AA square
High-capacity NiMH battery, 4.8 V, 2000 mAh.Max. discharge current´6 A
Continuous current approx.´4 A
Charge current: 2 A
Specification::
Dimensions: 31 x 31 x 54 mm Weight: 120 g~~Receiver Battery F14/F16 SQ|Robbe/Receiver Battery F14/F16 SQ/4550|~1733~2364~F14 RX battery~

Robbe Lader6 Mains Charger~A very useful charger for TX and RX along with many other different types of cells..
Capable all-purpose 230 V battery charger exploiting the latest generation of technology, designed for recharging transmitter,
receiver and starter batteries.
The charge monitor LEDs are fitted behind a clear front panel, and a special light pipe concentrates the light
to produce a very bright indicator which is easy to see in daylight and even in bright sunlight.
The unit features an integral battery test function which checks the state of the charged pack by giving a
brief charge current at 2 A when you press the button.
A 3-LED test monitor indicates the pack’s state of charge. This is a very useful tool in terms of safety,
especially with receiver batteries.
~An elegant and capable all-purpose 230 V battery charger exploiting the latest generation of technology,
designed for recharging transmitter, receiver and starter batteries.
The charge monitor LEDs are fitted behind a clear front panel, and a special light pipe concentrates the
light to produce a very bright indicator which is easy to see in daylight and even in bright sunlight.
The unit features an integral battery test function which checks the state of the charged pack by giving a brief charge current at 2 A when you press the button.
A 3-LED test monitor indicates the pack's state of charge. This is a very useful tool in terms of safety,
especially with receiver batteries.

* Integral battery test
* All charge outputs can be used simultaneously
* For NC and lead-acid batteries
* Updated charge currents for reduced charge periods
* Higher charge currents possible by wiring charge outputs together

Specification:
Dimensions: 150 x 130 x 75 mm
Weight: 900 g
more Specifications:
Input: 230 V AC, 50 Hz, Euro-plug
Output 1 - 5: 60, 60, 150, 150, 180 mA, 4 - 8 NC
Output 6: 1 - 10 NC or 2 - 12 Volt lead-acid
500 mA (max. 10 Ah)
Battery test: 4/5 or 8 NC at 2 A (2 - 3 sec.)
Protective functions: short-circuit and overload
~Robbe Lader6 Mains Charger|Robbe/ Lader6 Mains Charger/8365|~1733~2365~Robbe charger~

Robbe TX charging Lead For F Series Radios~Transmitter charge lead
Banana plugs / NES-J plug, 100 cm long
Pack of 1
~~Robbe TX charging Lead For F Series Radios|Robbe/ TX charging Lead For F Series Radios/1415|~1733~2368~charging leads robbe~

Robbe RX Charging Lead For F series Radios~Receiver battery charge lead
Banana plugs / 3-pin micro-connector
Cable:´0.25 mm2, 100 cm long
Pack of 1
~~Robbe RX Charging Lead For F series Radios|Robbe RX Charging Lead For F series Radios/1416|~1733~2366~charging leads robbe~

Lead Acid Charging Lead~Banana plugs / 4.8 mm Faston plugs
Cable: 0.75 mm2, 100 cm long
Pack of 1
For Charging Gell Cell Lead Acid Batteries~~Lead Acid Charging Lead|Robbe/Lead Acid Charging Lead/8137|~1733~4305~~

Menu Page | Toolbar Page |

Robbe Model Boat Radios