Engel Model Submarine Accessories:Model-Boats

Layout Table~~~~2523~2523~~

Engel Model Submarine Accessories~~~~2523~2524~~

Bread~

~~~2523~2869~~

New Display Item~A range of Accessories for the Engel subs inc switches, pitch controller's ,working bow planes. and Periscopes~~~2523~2525~~

New Layout Table~~~~2523~2526~~

New Display Item~~~~2523~2530~~

Pitch and Depth Controller LTR5~Running a sub steadily at periscope depth is really an achievement for any model submariner.
The LTR5 offers an automated system to succeed in this kind of manoeuvre. The LTR5 does not only offer a combination of pitch and depth controller but an interactive system of the two devices in a single unit.

This new version of the LTR will hold submarine models at a depth set by the transmitter via the dive planes.
In addition, the LTR5 has an output that can handle a proportionally operated piston tank.

~Running a sub steadily at periscope depth is really an achievement for any model submariner.
The LTR5 offers an automated system to succeed in this kind of manoeuvre. The LTR5 does not only offer a combination of pitch and depth controller but an interactive system of the two devices in a single unit.

Fully built-up with pressure sensor, inclinometer and microprocessor.

Technical Specifications:
• Type: plug-in-between device, powered by receiver battery, internal sensors and microprocessor
• Dimensions: 60x38x24 mm, milled plastic base
• 4 bores for mounting screws
• Weight: approx. 21 g
• Voltage: safe 4-6.5 V -- possible 3-12 V
• Consumption: 7.5 mA
• Impulses: positive, 1.0-2.5 ms -- works with all R/C systems
• Pressure safe to 2 bar abs. - Function: +0.1 bar (=0-1 m depth)
~Pitch and Depth Controller LTR5|Engel/Pitch and Depth Controller LTR5|~2523~3932~Pitch and Depth Controller LTR5 , Engel ,~

Static Dive Module TEAS~This upgrade kit includes the ready-soldered control unit TAES with pressure sensor. The unit is easy to
install as it must only be mounted on top of the TAE switch unit.

For all switch units TAE that were supplied BEFORE May 2002 please ask for a PIC upgrade
~~Static Dive Module TEAS|Engel/Static Dive Module TEAS/1855|~2523~2533~Staic Dive module ,TEAS , Engel ,~

Engel Magnetic Switch~This switch is operated by a magnet. Therefore, the receiver can be switched on and off just by moving the
magnet from front to back (or vice versa) of a certain area of the hull without having to open the model.

As soon as the switch has been sucessfully acitvated (or deactivated) a "peep" sound is heard and a LED lights up.

Required but not included is a magnet such as item-no. 1569.

Technical Data:
• on/off switch for receiver battery
• dimensions: 50x15x12 mm (1.97x0.59x0.42")
• operating current: 3.0-7.9 V
• current consumption: 14 mA at 4.8 V for LED • maximum stress: 2 A
• connection lead compatible with Futaba, JR/Graupner, HiTech, MPX-Uni
~~Engel Magnetic Switch|Engel/ Magnetic Switch/1568|~2523~2527~engel magnetic switch~

Neodym Magnet~Neodym Magnet for operating Magnetic On-/Off Switch #1568

Diameter 19 mm

~~Neodym Magnet|Engel/Neodym Magnet/1569|~2523~2531~Neodym magnet engel~

Mini Pitch Controller LR2~MiniPitchController LR2
This new pitch controller is really mini!

At 30x21x8mm it really has the dimension of a stamp. Nevertheless, it is a "grown-up" pitch
controller built in SMD technology. It will stabilise miniature just as well as the biggest submarine models.
The sensitivity is adjustable smoothly over a wide range. The horizon is set by appropriate mounting and adjusted from the transmitter.

~MiniPitchController LR2
This new pitch controller is really mini!

Dynamic switch or manual:
If you move the transmitter stick more than half way the controller is reduced in sensitivity and switched
off at full way. So you have direct manual control over your model if required without searching for an "off"button. This new version uses the newest generation of sensors which is on the market for just a
year now. The sensor uses hot air and detects its movement in a small cavity by a silicon chip. This sensor is maintenance-free, extremly robust and works very precise.

The software is entirely built in 'C'. This allows virtually stepless servo movements even at high sensitivity settings. You can not distinguish it from an analog controller.
Of course the device can handle unstable RC-signals also. Short glitches are removed. Longer pauses will force the controller to 'horizontal' and switch off the servo after 20 seconds (to reduce power consumption).
The new hardware is smaller than that of its predecessor. This allows us to pack it into a robust, CNC-milled housing.
The sensitivity to a weak power supply is fairly reduced, enabling the controller to work with fast and powerful digital servos.

Technical Specifications
• Type: plug-in-between device, powered by receiver battery
• Dimensions: 30x21x8mm, milled plastic housing
• Bore for mounting screw
• Weight: 6,1 g
• Voltage: safe 3,5-8,0V -- possible 2,0-12V
• Current: 1 mA pulses 0,9...2,2ms
• Repeat Rate 12...32ms -- fits to all R/C systems

The LR2 comes complete with universal servo lead (fits Futaba, Graup
Very simple installation and easy operation!

~Mini Pitch Controller LR2|Engle/Mini Pitch Controller LR2/1570|~2523~2532~Engel , Mini Pitch controller LR2 ,~

Working Dive Planes For GATO~This unit allows the front diving planes of the SS212 GATO to be retracted via R/C.
The diving planes remain fully operational as long as the planes are in their horizontal position. In all other
positions operation of the diving planes is blocked by an electric switch unit.
The unit consists of an inboard drive system which is placed within the WTC behind the front bulk head.
The mechanism itself is fitted in the flooded area at the bow section of the hull.

This upgrade kit includes:
• Drive unit with electric motor (ready assembled)
• Retract mechanism with pre-fabricated parts (in kit form)
• Front diving planes (cast in Resin)
• Electric switch unit
• Linkages and seals
• Instructions with 3-D drawings
• Full size installation plan (size A0) with detailled view of the entire inner setup of the model
~This unit allows the front diving planes of the SS212 GATO to be retracted via R/C.
The diving planes remain fully operational as long as the planes are in their horizontal position. In all other
positions operation of the diving planes is blocked by an electric switch unit.
The unit consists of an inboard drive system which is placed within the WTC behind the front bulk head.
The mechanism itself is fitted in the flooded area at the bow section of the hull.

Typhoon Working Periscope Set~This feature extraction/retraction of the periscope, radar and antenna in and out of the conning tower.

The kit includes all necessary components including electric motor as well as comprehensive instructions and drawings in English.

NEW! Now with improved toothed belt drive and scale retractable periscopes, antennas etc. (identical to Akula K-317).

~~Typhoon Working Periscope Set|Engel/Typhoon Working Periscope Set/1596-1|~2523~2548~Typhoon , Working periscope , Engel ,~

Conning Tower Mechanism For Akula~Pt No1593-1
Conning Tower Mechanism allows R/C retraction of radar, periscopes and antennas.
The slide as well as periscopes, radar and antennas are all ready-soldered.
The electric drive motor as well as the switch unit are also included in this kit.
~~ Conning Tower Mechanism For Akula|Egel/ Conning Tower Mechanism For Akula/1593-1|~2523~2565~Akula , Conning Tower Set , Working , Engel ,~

Front Dive Planes For AKULA K-317~Retractable Front Dive Planes AKULA K-317 Panther1593-2
Mechanism for retraction and operation of the front dive planes.
This option allows not only better handling for transport but also better performance of the model.
The electro-mechanical switch unit prohibits the dive planes to be retracted unless these are in neutral
~~Front Dive Planes For AKULA K-317/1592-3|Engel/Front Dive Planes For AKULA K-317/1592-3|~2523~2566~Working dive Planes Akula , Engel~

Lighting Unit for NAUTILUS 1597-1~This feature allows you to illuminate the "crocodile eyes" as well as the panoramic windows with their surrounding lamps.The kit consists of all the ready-built electric components (with LEDs) necessary, including an electric switch unit.~~Lighting Unit for NAUTILUS 1597-1|Engel/Lighting Unit for NAUTILUS/1597-1|~2523~2572~Lighting Unit for NAUTILUS , Engel~

Battery set for SSBN 616 Lafayette~4 High-Quality Battery Packs each consisting of 5 high performance NiMH cells with 3500mAh (=20 cells in total).
This results through parallel and serial connection of the packs in 12V/7000mAh.

This allows (i.e. with the Lafayette) a cruising time of more than 2 hours!

These packs are ready made including 60 cm long cables and have been especially designed to suit the "LAFAYETTE".

Techical Specifications per cell:
NiMH 1.2V 3500mAh
Discharge rate up to 10C

Dimensions (single battery pack):
Length approx. 115mm
Height (incl. cables) approx. 47mm
Width approx. 23mm
Weight approx. 320g

Charging times:
Standard 600mA x 7hrs
Fast 3500mA x 1.2hrs
Trickle 90-150mA

NEVER CHARGE BATTERIES in gas tight containers. Appropriate ventilation must be ensured.~~Battery set for SSBN 616 Lafayette|Battery set for SSBN 616 Lafayette|~2523~6538~Battery set for SSBN 616 Lafayette~

Menu Page | Toolbar Page |