Further Items are needed to complete this model 1 x 2channel Radio 2 x 3010 servos and 1 x Ylead
Further Items are needed to complete this model 1 x 2channel Radio 2 x 3010 servos and 1 x YleadSee List on the right
The Victoria features a blow-molded ABS hull and deck for ease of assembly, no painting is required. The aluminum main mast, boom, rigging line, and deck details are all included. The molded keel is already completed with the proper ballast installed in the keel bulb.
A die-cut wood stand is included which allows you to work on shore, or display your Yacht proudly. A standard 2 channel radio (not included) will complete the Victoria Yacht for hours of R/C sailing. A one-piece molded hull makes building this model yacht a breeze. Only a few enjoyable hours, a two channel radio system, and your ready to enjoy the pleasure of sailing on a gentle breeze or the thrill of model Yachting .~Victoria Yacht. Standing over 4’ tall, Thunder Tiger’s Victoria Yacht is the perfect model for the first time Sailor .
A die-cut wood stand is included which allows you to work on shore, or display your Yacht proudly. A standard 2 channel radio (not included) will complete the Victoria Yacht for hours of R/C sailing. A one-piece molded hull makes building this model yacht a breeze. Only a few enjoyable hours, a two channel radio system, and your ready to enjoy the pleasure of sailing on a gentle breeze or the thrill of model Yachting .
To complete See items on the right hand side
As you would expect, the Comtesse can cope with all headings from tacking into wind right round to sailing before the wind, which means that it is possible to sail the boat to any pre-determined point and then back again. The model is controlled by rudder and simultaneous adjustment of the mainsail and jib settings, i.e. all sailing maneuvers can be carried out using a simple two-channel radio control system and a sail servo .
The kit includes a moulded Plura hull, and all the other parts are pre-fabricated to ensure a short building time.
Specification:Length: 950 mm Width: 230 mm Height: 1500 mm Total displacement: 3200 g Ballast weight: 1800 gMast height: 1200 mm Sail area: 30.00 dm2 Draught: 210.00 mm
Our Price includes the fitting set to the model though extra items are required to complete see more info
kit includes a moulded Plura hull, and all the other parts are pre-fabricated to ensure a short building time.
* One-piece Plura hull (hull and deck do not need to be joined) with integral keel fin * Vacuum-moulded cockpit * Die-cut internal bulkheads and sliding hatch * Plastic rudder and shaft, ready to fit * Pre-sewn sails, one-piece aluminum mast, aluminum booms * All sail fittings * Detailed building instructions and plan
Specification:Length: 950 mmWidth: 230 mmHeight: 1500 mmTotal displacement: 3200 gBallast weight: 1800 gMast height: 1200 mmSail area: 30.00 dm2Draught: 210.00 mm
Our Price includes the fitting set to the model for extras to complete see right hand list Also you will need some lead shot substitute about 2.5kg for the ballest
Specification:Length: 1100 mm Width: 370 m m Height: 1890 mm Total displacement: 4200 g Ballast weight: 2200 g Sail area: 48.00 dm2~Semi-scale model of a Cup sailing yacht
The robbe Estelle is the ideal sailing boat for all modelers and would-be modelers who are seeking the essential core activity of this splendid hobby - sailing model yachts on inland waters in light to moderate winds.The overall design and technical lay-out of the robbe Estelle follow the current trend towards broad hulls of the yawl type. This special hull design offers the advantage of increased rigidity, fast sailing in suitable winds and choppy water, combined with excellent rudder response. The model's high reserves of displacement mean that it exhibits no tendency to tuck under on downwind tacks.Reasonable building time, distinctively elegant design and a fair system price are the crucial features of the robbe Estelle, making it the ideal craft for making a start or trying a "new tack" in the world of sailing boats, where this kit is superior to most of the opposition.
Specification: Length: 1100 mm Width: 370 mm Height: 1890 mm Total displacement: 4200 g Ballast weight: 2200 g Mast height: 1380 mm Sail area: 48.00 dm2
Recommended to Complete Kit Please see list on Right Hand Side ~Robbe Estelle|Robbe/Estelle|~4531~4560~Estelle ,Semi-scale model Boat, Cup sailing yacht,Yacht radio controlled~
The carefully optimized arrangement of the sail area allows the boat to achieve the maximum speed possible from the hull design even in moderate wind conditions on all headings.
This kit builds into a very impressive model indeed with high quality moulded parts along with metal and plastic fittings and good comprehensive instructions which is now typical of Robbe .The build is on the medium to expert side of things so a good model if you have done or two kits before hand
Specification:Length: 1380 mm Width: 360 mm Height: 2200 mm Standard Sail area: approx. 80 dm2Scale: 1:10 Total displacement: 12000 g Ballast weight: 8000 g Mast height: 1800 mmDraught: 300.00 mm
Our Kit comes complete with Fittings set 1077 and Keel 1078 and Mast 1079 Extra's are required to complete this model t ~The Smaragd (Emerald) is a large model which can be sailed even in quite strong winds right down to very light wind conditions .In its basic version can be controlled with a simple two-channel radio control system up to a full blown multi channel .
Kit Contents:* One-piece Plura® hull with integral superstructure* Vacuum-moulded cockpit* Plastic rudder with shaft and linkage* Die-cut and vacuum-moulded plastic internal hull components* Mainsail and jib* Profiled aluminum booms* Fittings for booms and sails, braided steel wire and adjustable turnbuckles for shrouds and stays* Cord for sheets and sheet control system* Central shroud tensioning mechanism* Decals, detailed building instructions and plan
Our Kit comes complete with Fittings set 1077 Keel 1078 and Mast 1079. Extra's are required to complete this model see right hand list ~Robbe Smaragd|2634|~4531~4555~Robbe, Smaragd, sailing yacht,Yacht radio controlled~
The special sail arrangement on the boat makes her stand out from the more familiar ship types of her time, and for this reason she is of particular interest to the modeller.
With a sail area of just on one square meter, distributed over several separate sails, and a streamlined hull with its characteristic extended keel, this imposing model offers an excellent performance and good maneuvering capability. Although the boat is quite heavy, the draught of the Atlantis is relatively small, so shallow in-shore waters present no problem.
The multiple sails give the operator plenty of scope for trimming the model to suit different wind speeds just by lowering and setting individual sails. The boat features an ingenious tensioning mechanism which means that only one screw has to be slackened on each mast when it is time to transport the "Atlantis". All the shroud settings can be left unchanged.
This kit is for the intermediate /expert builder comes complete with preformed hull fittings pack I.E all the part for the deck bollards and lifebelts and such along with full English instructions our price also includes the wood fittings to plank the deck with .You can also add a motor pack for it to get you back to shore when the wind drops.
Specification:Length: 1380 mm Width: 340 mm Height: 1730 mm Standard sail area: approx. 85.5 dm2Scale: 1:20 Total displacement: 17500 g Ballast weight: 11000 g Mast height: 1420 mmDraught: 240.00 mm
Our Kit comes complete with Fittings set 1134 , Keel 1131 and wood decking kit 1133. Extra's are required to complete this model see right hand list ~Radio-controlled semi-scale model of a two-masted schooner to 1:20 scaleThe original vessel was built in 1935 and is a 28 m long gaff-rigged schooner.
Kit contents:* Plura® hull* Profiled bulwark strips, die-cut hull and deck reinforcements* Ready-made rudder and all fittings* Die-cut splash cover for deck hatches* Ready-made moulded superstructure section* Aluminum masts and booms, gaff boom* Fixings and tensioning components for standing rigging, central tensioning mechanism* Ready-made sails* Woven polyester cord for sheets and sheet control system* Small parts, accessories and decals* Detailed building instructions and plan
Our Kit comes complete with Fittings set 1134 , Keel 1131 and wood decking kit 1133. Extra's are required to complete this model see right hand list ~Robbe Atlantis wishbone Scooner|Robbe Atlantis wishbone Scooner+fittings|~4531~4557~Robbe, Atlantis , Wishbone Scooner, sailing yacht,Yacht radio controlled~
In 1868 the ?9 m long Vanadis was launched, rigged as a Newfoundland schooner. During her colorful career the vessels high speed was in demand, and at times she operated as a smuggling boat and as a customs vessel.In the period 1978 to 1981 she underwent complete restoration in Hamburg, and since then she has sailed under the name Valdivia von Altona. She now serves as a charter vessel for extended sailing cruises, and has taken part with great success in international regattas.
This model is one of Robbe's best Sailing boats ment for the intermediate to expert builders though that said anyone with a good workshop could build this with a little time . Building and operating of this large model will present many hours of pleasure to the experienced marine modeller who enjoys working with wood and other materials. If you are one of them, our model of the Valdivia will take you back effortlessly to the atmospheric heyday of these marvelous sailing yachts.
Specification: Length: 1580 mm Width: 300 mm Height: 1300 mm Scale1:20Total displacement: 9000 g
~Scale model of a sailing schooner to 1:20 scaleIn the mid-1860s a Swedish distilling company placed a contract with the Stockholm dockyard of Soedra Varvet for the construction of a fast, elegant sailing schooner.
Kit contents:# Vacuum-moulded plastic parts for hull, deck, bulwark and superstructure# Wood and plastic parts for internal fittings# Complete rudder system# Multi-part masts and booms in GRP and aluminum# Installation materials and fixings for sail winches# Mechanical sail setting drive components, including chains and sail drums# Complete sail suit and all rigging# Small hardware items and fixings# Boat stand# Multi-colour decal sheet# Multi-lingual building instructions with plan
Nb 2 Sail Whinches are requiredOur Kit comes complete with Fittings set 1142 , Keel 1141 and power set 1144. Extra's are required to complete this model see right hand list ~Robbe Valdivia Sailing Schooner|Robbe Valdivia Sailing Schooner+1141,1142+1144|~4531~4565~Robbe ,Valdivia , sailing schooner,sailing yacht,Yacht radio controlled~
The Windstar Hull meets the rules of the international one-meter boat class. Its outstanding features are its fine sailing qualities and simple, well-balanced handling.
A special feature is the availability of different sail suits for strong, moderate and light wind conditions. The model is supplied with a white pigmented GRP hull. For competition work an optional non-pigmented hull can be used.
Specification:Length: 1000 mm Width: 195 mm total displacement: 4000 g Ballast weight : 2100 g
~Radio-controlled one-meter sailing boat. An ideal beginner's boat in the international one-meter class
The Windstar meets the rules of the international one-meter boat class. Its outstanding features are its fine sailing qualities and simple, well-balanced handling.
Kit contents:* White pigmented GRP hull with integral deck* Die-cut plastic panel to seal the deck opening* Plastic rudder with shaft and linkage* Injection-moulded keel* Ballast weight* Rigging thread for sheets and sheet control system* Central tensioning arrangement for shrouds* Decal sheet
The Windstar comes complete with fittings but you need to add a sail set as listed in the right hand column you can add three different Sail Suits to the model .So as to sail in grater wind conditions~Robbe Windstar One Meter Design|Robbe Windstar One Meter Design|~4531~4567~Robbe ,Windstar One Meter Design,,sailing yacht,Yacht radio controlled~